Jumper dress 2017


free baby dress pattern // see kate sewjumper dress pattern

I actually designed this in October when I was playing with plaidy fabrics. I’ve had the jumper dress 2017 pattern pieces sitting around for all that time, sheesh. I wasn’t quite sure about the pattern but once I tried it jumper on the baby I loved it. Sometimes it’s hard to tell if something is cute until you put it on, especially for baby clothes. So I made another one in gingham and all of the sudden it screams summer.

Materials:
free baby jumper dress pattern pdf (size 3-6 months)
1/2 yard gingham fabric (or any fabric, but this is gingham style after all!)
1/4″ elastic
sunglasses (optional)

1 ruffle rectangle: 9″ by 4″
2 skirt rectangles: 8″ by 23″

First print off the pattern piece and tape it together. This is a totally weird shaped pattern, haha, but trust me!

jumper dress pattern

 

Now cut 2 bodice pieces, 1 rectangle for a ruffle (9″ by 4″, optional) and 2 skirt rectangles (8″ by 23″). Cut the ruffle and skirt on the bias if you want! (I did!)

cutting guide jumper dress

To create the ruffle, fold the 9″ by 4″ rectangle in half and sew up the side seams. Trim the seam allowance, clip the corners and turn the rectangle. Press. Use a baste stitch to gather the open edge. The finished ruffle will be about 3.5″ at the top. Pin to the center of the bodice neckline and baste it on. (Basting means using a wide stitch length so the stitching is easy to gather or pick out later.)

ruffle jumper dress tutorial

Pin the bodice lining to the bodice front. Sew up the straps, sides and neckline. Use a 1/4″ seam allowance for the straps. Trim seam allowances, turn and press.

baby jumper dress

The ruffle will likely stick up, so pin it down and topstitch at about 1/4″ to make it lay flat.
baby jumper dress DIY

Serge or zig zag the bottom edge of the bodice piece.

DIY jumper dress

SKIRT:

Sew the two skirt pieces together at the side seams. Finish seam allowances and serge or zig zag the top and bottom edges of the skirt.

skirt

Now fold up and press 3/4″ on the top and 1/2″ on the bottom. Topstitch at 1/4″ at the bottom. (Sorry I didn’t get a good picture of this, but here is the topstitching.) Topstitch the top front with a baste stitch (we’ll be gathering it soon.) Topstitch the top back with a regular stitch, starting and stopping at each side seam, to create a casing.

jumper dressInsert 8″ of 1/4″ elastic in the back casing. Attach it to each side seam by stitching it in place.

casing-dress

Pull the basting thread in the front of the skirt to gather the fabric creating a soft ruffle. Gather it up to match the length of the bottom of the bodice. Pin the skirt ruffle on top of the bodice.

ruffle-jumperStitch it on right over the baste stitch.

stitch-on

Now cross the straps over the back and stitch them on. You can also sew them together where they meet if you want.straps

And you’re done! jumper dress for baby

suspender back

gingham2
more gingham style posts:
introduction
bow sunglasses case tutorial

Here’s a little sneak peek of the next gingham style tutorial:ruffle bloomersfabrics used in this post:
lilac gingham c/o Fashion Fabrics Club
black gingham: upcycled


Источник: http://seekatesew.com/gingham-style-free-baby-jumper-dress-pattern/


Закрыть ... [X]

Ikat bag: Dress for Winter III - A Very Simple Jumper Home gardenideas for beauty


Jumper dress 2017

[домой Все категории Свадьбы и торжества Посмотреть название на.



Jumper dress 2017

[



Jumper dress 2017

[



Jumper dress 2017

[



Jumper dress 2017

[



Jumper dress 2017

[



Jumper dress 2017

[



Jumper dress 2017

[



Jumper dress 2017

[



Jumper dress 2017

[



Jumper dress 2017

[



Jumper dress 2017

[